CE Credits

PDH Seminar at DORMA, Dec. 10, 2013

Posted by BxNSPE on December 05, 2013  /   Posted in CE Credits, Local Events

DORMA is hosting a continuing education seminar as described below.  It’s approved by AIA for continuing education credits and, as such, is also approved for NYS PEs.

Contact DORMA directly as per below.

____________________________________________

ADA Tips for Designing Hotels in the Big Apple

1 CEU/LU/PDH HSW

Learn more here or Register Now!

Sponsored by: Steven Winter Associates Inc. and DORMA


When

Tuesday, December 10th
5:30pm Wine & Snacks Reception
6:00pm to 7:15pm Presentation

Where

DORMA Design Center
1040 Avenue of the Americas
22nd Floor
New York City

 

Further questions

Call 347/271-1160 or send an email to designctr@dorma-usa.com

PDH Seminar at DORMA, Dec. 18, 2013

Posted by BxNSPE on December 05, 2013  /   Posted in CE Credits, Local Events

DORMA is hosting a continuing education seminar as described below.  It’s approved by AIA for continuing education credits and, as such, is also approved for NYS PEs.

Contact DORMA directly as per below.

_________________________________________________

Scan to BIM – Restoration and Conservation

DECEMBER 18, 2013

em dash black

AIA CES: 1 LU / PDH HSW

Using Autodesk essentials we’ll provide some engaging visuals and an introduction to laser scanning, processing, post processing, indexing and establishing your point cloud in the Revit model. You’ll see how hybrid views can be used to display areas of deficiencies; and get advice on visibility graphics, clipping boxes and modeling techniques. Perhaps most importantly, learn how to use in applications to the Landmarks Preservation Commission, Building Department, owner or building management, Finally see how the point clouds can be used for fabrication of historically significant elements–terracotta cornices, building ornamentation, and more.

 

Presenters

Hannah Sebastian DeMayta, BIM Department Manager, CSA Group

Raul Mayta, Project Associate, Rand Engineering and Architecture

 

Where
DORMA Design Center
1040 Avenue of the Americas, 22nd Floor, NYC

When
Wednesday December 18, 2012
5:45pm – Reception and Snacks
6:15pm to 7:15pm – Presentation

 

Reserve your space

Email designctr@dorma-usa.com or call 347/271-1160

Multiple PDH Seminars at DORMA, Tuesday Dec. 17, 2013

Posted by BxNSPE on December 05, 2013  /   Posted in CE Credits, Local Events

The following is information from DORMA about an all day session of seminars.  These are approved by AIA for continuing education.  They are creditable for NYS PE continuing education as well.

Contact DORMA directly as per below.

________________________________________________

PROCRASTINATOR’S DAY
TUESDAY DECEMBER 17, 2013

em dash black
Earn Last Minute AIA Credit Hours
at DORMA’s Design Center in NYC

Earn those last minute AIA credit hours at the DORMA Design Center. We’ll serve snacks and take care of the AIA details for you.

Where
DORMA Design Center
1040 Avenue of the Americas, 22nd Floor, NYC

When
Tuesday December 14, 2012
8 am to 7 pm

Schedule 8am –

Interior Glass Wall Systems

1 CES LU /PDH HSW

Presenter: Wendy Talarico, DORMA

 

12pm

Operable Partition Walls

1 CES LU/PDH HSW

Presenter: Jim Kaiser, Modernfold Styles

 

1:15pm

Understanding Electrified Hardware

1 CES LU/PDH HSW

Presenter: Wendy Talarico, DORMA

 

6pm

Revolving Door Systems

1 CES LU/PDH HSW

Presenter: David Hessel, Crane Revolving Doors

 

7pm

ADA Basics, Codes & Architectural Hardware

1 CES LU/PDH HSW

Presenter: Wendy Talarico, DORMA

   

 

Reserve your space

Call 347/271-1160 or email designctr@dorma-usa.com

Innovations in 3D Printing at DORMA Design Center Oct. 2, 2013

Posted by BxNSPE on September 25, 2013  /   Posted in CE Credits, Local Events

The following is an announcement of a continuing education seminar that was issued by DORMA Design Center.  The continuing education accreditation is through AIA.  The “practice” reference in the body is for architectural application.
________________________________________________________________

 

Dorma3DPrint

Dorma3DPrint

@ DORMA DESIGN CENTER

Innovations in 3D Printing
1 CEU/LU/PDH HSW

We’ll take a look inside the 3D printing world, technically and philosophically, to give you a clear picture as to why it is important in your practice. Learn how design firms are using 3D printing to study form and complex geometries, as well as to produce site models, floor plans, and building plugs. Separate yourself from the competition by presenting design ideas in a new way.

Presenter:
Justin Levitz, Director of 3D Technologies for NRI

When:
Thursday, October 2nd
5:30pm Reception & Snacks
6:00pm Presentation

Where:
DORMA Design Center
1040 Avenue of the Americas
22nd Floor
New York City

Register Now!
Send an email to designctr@dorma-usa.com
or call 347/271-1160

ASME Metropolitan Section Meeting Sept. 19, 2013

Posted by BxNSPE on September 16, 2013  /   Posted in CE Credits, Local Events

The Metropolitan Section of ASME has announced the following meeting for September 19, 2013.  Contact them directly, as per below, if you are interested in attending.

THE ASME METROPOLITAN SECTION

RESERVATIONS REQUIRED

Date:                                            THURSDAY, September 19, 2013

Time:                                  Registration and Dinner   5:30 – 6:15 PM

Program:             6:15 to 7:30 PM

Where:                      COOPER UNION UNIVERSITY located at 41 Cooper Square  

                     Between 6th & 7th Streets on Third Ave, N.Y.

           

Speaker:        Dr. Stacey Sullivan

 

Subject:       “The Effect of Micro-textured CoCrMo-carbide Surfaces on the Attachment and Viability of Osteoblast-like MG63” – Wear of total joint replacement (TJR) articulating surfaces is a major concern in the orthopaedic community and the improved wear performance of implantable materials is of great interest.  All foreign particles generated within the body, have the potential to initiate an inflammatory response.  In this presentation, Dr. Sullivan discusses the challenge of designing a biocompatible material couple with no friction and no wear, and the creation and testing of various CoCrMo-carbide surfaces to determine biocompatibility.

Cost:                Free to all Student Members and Members, $20.00 for all other attendees – to be paid at door by cash or check only.

Note:  Due to building security requirements, ALL attendees whether paying or not MUST pre-register by Tuesday, September 17, 2013, so that security passes can be arranged.  You can register by calling or e-mailing Ed Ecock at edwardeco@aol.com or phone 718-702-2271.

 

CPC opportunities

Posted by BxNSPE on June 06, 2013  /   Posted in CE Credits

NEW! – Additional PDH opportunity source added Sept. 2008

Visit our new forum/discussion board. In addition to general discussions and meeting information, we have arranged for announcements of commercial offerings of PDH courses. Currently, postings are there from Marzzo Engineering & Educational Services, from Professional Engineering Continuing Education, and from NY Designs.

If you need the NSPE generated templates for Chapter websites, you can get them here.

No Current Job Opportunity posted on the Job Opportunities page.

NEW!

We have added a page for announcements of the Engineering Colloquia at Manhattan College. We hope that these will soon carry CPC credit! Current posting is for May 2005.

Learn About CPC Opportunities!

Our members know about CPC availability. Some of it free. Do you? Contact us!

CPC opportunities at Manhattan College:
Overview
Details

^ Back to Top